Forms of delivery
REF: 3110
- 1 litre dosage bottle
REF: 3116
- 5 litres can
REF: 3111
- 10 litres can
Appliances for use
REF: 9003
- Pump for cans
REF: 9006
- Dispenser tap
REF: 9004
- Can wrench
Cleaning
BEVISTON offers a wide range of professional cleaning, hygiene and care products which characterize themselves by a particular user- and environment-friendliness. BEVISTON does without unnecessary scents and auxiliary material and achieves through this measure an enormous ecological advantage apart from the low dosage concentrations.
Excursus biofilms
Biofilms in dental aspiration systems: What is that?
Biofilms are slimey deposits usually of the bacterial type which accumulate in a moist environment to surfaces and grow. The appearance of biofilms is often compared with algae/mold deposits (e. g. moldy deposits in tile joints, water tanks, hoses etc.).
Where to find biofilms?
Each day a mixture of water and secretion (including saliva, blood, amalgam, tooth particles etc.) runs through the suction lines of a dental unit and partially remains there, even directly at the entry to the dental suction system. This causes a rapid increase of germs in the suction lines. As a result, biofilms can form supported by dirt and bacteria residues. Consequently, there is a colonization of various bacteria and development of a bio layer – the so-called biofilm.
HOW DO BIOFILMS FORM EXACTLY?
Microorganisms (bacteria, fungi etc.) colonize on surfaces of moist environment (such as suction lines of dental suction systems or service water lines of dental units as mentioned above). The large surfaces of pipe or tube systems offer a perfect environment for a rapid increase of germs (formation of biofilm). Particularly during treatment breaks (stagnation) the brackish water stagnates in the lines (suction and service water ways) and causes an increase of temperature of up to more than 37°C.
How can the formation of biofilms in dental suction systems be prevented?
- Nutrients minimized by the use of specially designed cleaning products.
- At high microbiological loads focus on efficient cleaning products (e. g. with Bevisto W1 and W2 Bevisto in the weekly change), – instead of disinfectants.
- Carry out a regular intensive decontamination of treatment water with appropriate products (e. g. hydrogen peroxide).
- Documentation and regular monitoring of hygiene is important.
Bevisto W1 | cleaner for suction units
Bevisto W1 is a highly effective acid suction unit cleaner for medical suction systems, e. g. suction units of dental units. Free of aldehydes, phosphates, phenols and chlorine! Bevisto W1 is free of foam and particularly compatible with materials. Bevisto W1 should be used in weekly change with Bevisto W2.
- Very economical
- Free of aldehydes and phenols
- Foam-free
- Excellent cleaning properties
- Gentle material compatibility
- Pleasant fragrance, no workplace values to be monitored (emissions)
- Easily biodegradable
Bevisto W2 | cleaner for suction units
Bevisto W2 is a highly effective alkaline suction unit cleaner for medical suction systems, e.g. suction units of dental units. Free of aldehydes, phosphates, phenols and chlorine! Bevisto W2 is free of foam and particularly compatible with materials. Bevisto W2 should be used in weekly change with Bevisto W1.
- Very economical
- Free of aldehydes and phenols
- Foam-free
- Excellent cleaning properties
- Gentle material compatibility
- Pleasant fragrance, no workplace values to be monitored (emissions)
- Easily biodegradable
BEVISTON CMS |mixing container
BEVISTON CMS (BEVISTON Cleaning and Maintenance System) is a special mixing container for the dental cleaning agents for aspiration systems Bevisto W1 and Bevisto W2 (capacity of BEVISTON CMS: 2 litres).
By using BEVISTON CMS the cleaning agents for aspiration systems Bevisto W1 and Bevisto W2 are rinsed in the dental aspiration system through the aspiration tubes and the spittoon bowl (1 litre each) in weekly change.
- Stainless steel bottom including a rubber edge
- Dosage
- Connection pieces
- Cleaning
- Check for residues
- Further information:
BEVISTON CMS disposes of a stainless steel bottom including a rubber edge providing stability and slip resistance when working with it.
BevistoTray Cleaner | cleaner for impression trays
BevistoTray Cleaner is a liquid concentrate for cleaning and dissolving casting compounds and adhesives from medical impression trays and mixing instruments. The dosage is 5 % to 10 % (about 50 ml–100 ml BevistoTray Cleaner diluted in 1 l of water). This is done through by submersion, (for example by placing an impression tray in a soaking tray filled with a BevistoTray Cleaner solution). BevistoTray Cleaner is also suitable for use in ultrasonic baths.
Exposure time and concentrations
Medical impression trays and mixing instruments contaminated by e. g. impression material residues should first be cleaned roughly of adhering residues before being placed in the BevistoTray Cleaner solution (for concentration see below).
- 5%ig*, i.e. diluting 50 ml with 950 ml of warm water (< 40 °C) in a soaking tray or ultrasonic bath
- 10%ig*, i.e. diluting 100 ml with 900 ml of warm water (< 40 °C) in a soaking tray or ultrasonic bath
*concentrations depending on the degree of contamination and exposure time
The BevistoTray Cleaner solution softens the adhering material residues within a few hours and allows the user to rinse under running water, if necessary, with the aid of a brush.
It is advisable to leave the impression trays and/or mixing instruments in the BevistoTray Cleaner solution overnight and, if necessary, rinse under running water with the aid of brush on the following day (an exposure time of 15 minutes is sufficient in an ultrasonic bath).
Active ingredients in 100 g
- 2-propanol
- sodium cumene sulfonate
- complexing agents
CE
- Product qualities
- Fields of application
- Application notes
- Compatibility / stability / water quality
- Biodegradability
- Attention when handling
BevistoTray Cleaner dissolves:
- residues of alginates
- zinc oxide-eugenol
- carboxylates
- phosphate- and glass ionomer-cements
- contact adhesives from mixing instruments and impression trays
- using an ultrasonic bath in combination with BevistoTray Cleaner accelerates the cleaning process
Bevisto ALR | all-purpose cleaner
Bevisto ALR is a very effective alcoholic surface cleaner (concentrate) and is very suitable for all surfaces which are resistant to wiping such as glass, plastics (synthetic leather), tiles etc. Bevisto ALR has a degreasing effect and dries very quickly.
Exposure time and concentrations
Depending on the degree of contamination, we recommend one of the following dosages:
- 0,25% ≙ 20 ml of concentrate on 8 litres of water
- 0,50% ≙ 40 ml of concentrate on 8 litres of water
- 1,00% ≙ 80 ml of concentrate on 8 litres of water
- 1,25% ≙ 100 ml of concentrate on 8 litres of water
- 1,50% ≙ 120 ml of concentrate on 8 litres of water
Active ingredients in 100 g
- < 5% of anionic surfactants, non-ionic surfactants, EDTA
- Further ingredients: Colorants and perfumes
- Concentrated cleaner for cleaning large surfaces
- Degreasing effect
- Quick drying of cleaned surfaces
- Economical use
- Pleasant fresh lemon scent
BevistoCare | upholstery cleaner
BevistoCare is a cleaning concentrate for all carpeted floors. It can be used on all colourfast textile floors and bolsters. Removes all kind of dirt from carpets, bolsters and seat covers etc. Removes dirt and water stains and renews old colours. With antistatic additive.
- Free of aldehydes and phenols.
- Removes dirt from carpets, bolsters and seat covers
- Renews old colours
- Removes dirt and water stains
BevistoDescaler | surface cleaner
BevistoDescaler is a very effective cleaning and care concentrate for the efficient removal of calcium deposits from hot water appliances. BevistoDescaler is also suitable for the cleaning of acid resistant surfaces. The dosage is carried out in a dilution with warm water (40 °C to 60 °C).
BevistoGlass Cleaner | surface cleaner
BevistoGlass Cleaner is a ready-to-use glass cleaner for the manual cleaning or preparation of glass windows, glass doors, glass plates, mirrors, glass cabinets etc. BevistoGlass Cleaner removes dust, dissolves and removes fat. BevistoGlass Cleaner also removes yellowing from glass windows and window frames that was caused through smoking.
Bevisto Orange Solvent | universal cleaner
Bevisto Orange Solvent is a universal cleaning agent ready for use containing components made of natural orange oil. Bevisto Orange Solvent is used for cleaning surfaces and instruments which are contaminated with alginates, cements, zinc eugenol stains and/ or residues of impression masses and adhesive varnishes.
- Removes varnishes, impression pastes and zinc oxide cements from impression trays and instruments
- Removes different kinds of colour residues from textile materials
- Deep cleaning of all washable surfaces (such as laminate)
- Removal of solid fat residues and impurities
- Cleaning of glass surfaces (such as mirrors, windows, etc.)
- Removal of tar and corrosion residues (rust, verdigris, etc.)
- Free of aldehydes and phenols
Bevisto-Plastic-Cleaner | plastic cleaner
BevistoPlastic Cleaner is a special cleaner for all kind of plastics, stainless steel, alkali-resistant metals (e.g. at commercial vehicles, machines, etc.). BevistoPlastic Cleaner is suitable for cleaning tarpaulins and plastic furniture. BevistoPlastic Cleaner penetrates weather-beaten, open cell materials and breaks down old dirt. BevistoPlastic Cleaner is also suitable for machine intensive cleaning of heavily used PVC floors and the use in high pressure cleaners.
- Removes dirt from open cell materials such as plastic tarpaulins and protective covers
- Removes old adhesive residues from plastic and tile surfaces
- Removes different kind of colour residues from plastic surfaces
- Deep cleaning of PVC (Vinyl) floors and glass surfaces
- Free of aldehydes and phenols
BEVISTON GmbH
Nordholz | Germany
Scharnstedter Weg 34 - 36
27639 Wurster Nordseeküste
Fax: +49 4741-18 19 83 1
www.beviston.com